How do you change the Freeflow spa filter cycle?

FILTER CYCLES There are two filter cycles: the first cycle (F1) starts right after power up and the second cycle (F2) will start 12 hours later. The default duration for the first filter cycle is 1 hour, and 30 minutes for the second cycle. Filter cycles only run at low speed. The “Filter” indicator lights up when a filter cycle is on. The duration of each filter cycle can be modified. Filter duration is programmable between 0.5 and 6 hours in 30 minute increments (0.5 hours) for both filter cycles. To program the cycle times follow the steps below:

1. Press and hold Program Mode button for 5 seconds until F1 is displayed. 

2. Press the Plus or Minus button to adjust the cycle time for F1. 

3. Press the Program Mode button to store the F1 cycle and move to the F2 cycle. 

4. Press the Plus or Minus button to adjust the cycle time for F2. 

5. Wait 15 seconds to allow the exit timer to expire and store the setting.